Asterisk Manager Interface (Restricted Access) - Grandstream Networks UCM6100 Series User Manual
Ip pbx
Hide thumbs
Also See for UCM6100 Series:
- User manual (418 pages) ,
- Manual manual (24 pages) ,
- Configuration (19 pages)
Table of Contents
Advertisement
ASTERISK
M ANAGER
I NTERFACE
( RESTRICTED
A CCESS)
Starting from firmware 1.0.8.11, the UCM6100 supports Asterisk Manager Interface (AMI) with restricted
access. AMI allows a client program to connect to an Asterisk instance commands or read events over a
TCP/IP stream. It's particularly useful when the system admin tries to track the state of a telephony client
inside A sterisk.
User could configure AMI parameters on UCM6100 web GUI->PBX->Internal Options->AMI. For details
on how to use A MI on UCM6100, please refer to the following A MI guide:
http://www.grandstream.com/products/ucm_series/ucm61xx/documents/ucm6100_ami_guide.pdf
--------------------------------------------------------------------------------------------------------------------------------------------
Warning:
Please do not enable A MI on the UCM6100 if it is placed on a public or untrusted network unless you have
taken steps to protect the device from unauthorized access. It is crucial to understand that A MI access can
allow AMI user to originate calls and the data exchanged via AMI is often very sensitive and private for
your UCM6100 system. Please be cautious when enabling AMI access on the UCM6100 and restrict the
permission granted to the AMI user. By using AMI on UCM6100 you agree you understand and
acknowledge the risks associated with this.
--------------------------------------------------------------------------------------------------------------------------------------------
Firmware Version 1.0.9.26
UCM6100 Series IP PBX User Manual
Page 218 of 304
Advertisement
Table of Contents
Troubleshooting
