Ldap Server Configurations; Figure 36: Ldap Server Configurations - Grandstream Networks UCM6100 Series User Manual

Users could add new phonebook with a different Phonebook DN for other external contacts. For
•
example, "ou=people,dc=pbx,dc=com".
All the phonebooks in the UCM6100 LDAP server have the same Base DN "dc=pbx,dc=com".
•
Term Explanation:
cn= Common Name
ou= Organization Unit
dc= Domain Component
These are all parts of the LDAP data Interchange Format, according to RFC 2849, which is how the LDAP
tree is filtered.
If users have the Grandstream phone provisioned by the UCM6100, the LDAP directory will be set up on
the phone and can be used right away for users to access all phonebooks.
Additionally, users could manually configure the LDAP client settings to manipulate the built-­in LDAP
server on the UCM6100. If the UCM6100 has multiple LDAP phonebooks created, in the LDAP client
configuration, users could use "dc=pbx,dc=com" as Base DN to have access to all phonebooks on the
UCM6100 LDAP server, or use a specific phonebook DN, for example "ou=people,dc=pbx,dc=com", to
access to phonebook with Phonebook DN "ou=people,dc=pbx,dc=com " only.
UCM can also act as a LDAP client to download phonebook entries from other LDAP server.
To access LDAP server and client settings, go to Web GUI-­>Settings-­>LDAP Server.
LDAP S ERVER C ONFIGURATIONS
The following figure shows the default LDAP server configurations on the UCM6100.
Firmware Version 1.0.9.26
Figure 36: LDAP Server Configurations
UCM6100 Series IP PBX User Manual Page 72 of 304