Grandstream Networks UCM6100 Series User Manual page 180

Enable Caller Menu
Record Conference
Quiet Mode
Wait For A dmin
Enable User Invite
Announce Callers
Public Mode
Play Hold Music
Firmware Version 1.0.9.26
Note:
If "Public Mode" is enabled, the password is not required to join the
•
conference bridge thus this field is invalid.
The password has to be at least 4 characters.
•
If enabled, conference participant could press the * key to access the
conference bridge menu. The default setting is "No".
If enabled, the calls in this conference bridge will be recorded
automatically in a .wav format file. All the recording files will be displayed
and can be downloaded in the conference web page. The default setting
is "No".
If enabled, if there are users joining or leaving the conference, voice
prompt or notification tone won't be played. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same
time.
If enabled, the participants will not hear each other until the conference
administrator joins the conference. The default setting is "No".
Note:
If "Quiet Mode" is enabled, the voice prompt for "Wait For Admin" will not
be announced.
If enabled, users could press 0 to invite other users (with the users'
permission) or press 1 to invite other users (without the user's permission)
to join the conference. The default setting is "No".
Note:
Conference administrator can always invite other users without enabling
this option.
If enabled, the caller will be announced to all conference participants
when there the caller joins the conference. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same
time.
If enabled, no authentication will be required when joining the conference
call. The default setting is "Yes".
If enabled, the UCM6100 will play Hold music when there is only one user
UCM6100 Series IP PBX User Manual Page 179 of 304