Table 17: Firewall Rule Settings; Figure 34: Create New Firewall Rule - Grandstream Networks UCM6100 Series User Manual

Action: "Accept"
•
Type "In"
•
Destination port is set to the system login port (e.g., by default 8089)
•
Protocol is not UDP
•
Rule Name
Action
Type
Service
Firmware Version 1.0.9.26
Figure 34: Create New Firewall Rule
Table 17: Firewall Rule Settings
Specify the Firewall rule name to identify the firewall rule.
Select the action for the Firewall to perform.
ACCEPT
•
REJECT
•
DROP
•
Select the traffic type.
IN
•
If selected, users will need specify the network interface "LAN" or "WAN"
(for UCM6102 only) for the incoming traffic.
OUT
•
Select the service type.
FTP
•
SSH
•
Telnet
•
TFTP
•
HTTP
•
LDAP
•
Custom
•
If "Custom" is selected, users will need specify Source (IP and port),
Destination (IP and port) and Protocol (TCP, UDP or Both) for the service.
Please note if the source or the destination field is left blank, it will be used
as "Anywhere".
UCM6100 Series IP PBX User Manual Page 68 of 304