Grandstream Networks UCM6100 Series Configuration
Hide thumbs
Also See for UCM6100 Series:
- User manual (418 pages) ,
- Manual manual (24 pages) ,
- Configuration (19 pages)
Related Manuals for Grandstream Networks UCM6100 Series
Summary of Contents for Grandstream Networks UCM6100 Series
- Page 1 Grandstream Networks, Inc. Interoperability Tutorial: ® Configuring UCM6100 Series with FreePBX Grandstream Networks, Inc. www.grandstream.com ® FreePBX is a Registered Trademark of Schmooze Com, Inc.
-
Page 2: Table Of Contents
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. Firmware Version 1.0.1.25 Configuring UCM6100 Series With FreePBX... -
Page 3: Change Log
Minor updates for corrections or editing are not documented here. Firmware Version 1.0.1.25 This is the initial version. Firmware Version 1.0.1.25 Configuring UCM6100 Series With FreePBX Page 2 of 10... -
Page 4: Overview
When using the IVR in UCM6100 series, please be aware that if "Dial Trunk" option is turned on in IVR settings, the call into the IVR will be able to dial outbound call using UCM6100's trunk. The IVR's permission level will be used when making outbound calls in this case. -
Page 5: Configuring Sip Trunk
FreePBX to register SIP trunk to the UCM6100. The password for the extension will be randomly generated if not specified. Figure 1: Create an Extension on UCM6100 Firmware Version 1.0.1.25 Configuring UCM6100 Series With FreePBX Page 4 of 10... -
Page 6: Configure Sip Trunk On Freepbx
2. On the same trunk setting page, configure the registration string so that the FreePBX can register the SIP trunk to the extension created on UCM6100 in section [Create Extension on UCM6100] Firmware Version 1.0.1.25 Configuring UCM6100 Series With FreePBX Page 5 of 10... -
Page 7: Configure Sip Trunk On Ucm6100
Figure 4: Create Register SIP Trunk on the UCM6100 2. Configure the following information for this trunk so that the UCM6100 can register to the FreePBX trunk we just created. Firmware Version 1.0.1.25 Configuring UCM6100 Series With FreePBX Page 6 of 10... -
Page 8: Configure Call Routes On Freepbx
From User: Same as username, i.e., freepbxtrunk. Configure Call Routes on FreePBX 1. On the FreePBX web GUI, go to outbound route setting page to create an outbound route for the SIP Firmware Version 1.0.1.25 Configuring UCM6100 Series With FreePBX Page 7 of 10... -
Page 9: Configure Call Routes On Ucm6100
1. On the UCM6100 web GUI, go to PBX->Basic/Call Routes->Outbound Routes to create a new outbound rule. This would allow the extension on the UCM6100 to reach extensions (5xx, in this example) on the FreePBX. Firmware Version 1.0.1.25 Configuring UCM6100 Series With FreePBX Page 8 of 10... -
Page 10: Figure 7: Configure Outbound Route On The Ucm6100
Figure 7: Configure Outbound Route on the UCM6100 2. On the UCM6100 web GUI, go to PBX->Basic/Call Routes->Inbound Routes to create a new inbound rule. Firmware Version 1.0.1.25 Configuring UCM6100 Series With FreePBX Page 9 of 10... -
Page 11: Figure 8: Configure Inbound Route On Ucm6100
You can further configure the inbound rule, outbound rule, IVR and the corresponding permission/privilege levels to control the calls through the UCM6100. * Asterisk is a Registered Trademark of Digium, Inc. Firmware Version 1.0.1.25 Configuring UCM6100 Series With FreePBX Page 10 of 10...