Change  Password; Ldap  Server - Grandstream Networks UCM6100 Series User Manual

Ip pbx
Hide thumbs Also See for UCM6100 Series:
Table of Contents

Advertisement

MaxRetry  
Fail2Ban  Whitelist  
Local  Settings  
Asterisk  Service  
Protocol  
MaxRetry  
 
 
CHANGE   P ASSWORD  
 
After  logging  in  the  UCM6100  web  UI  for  the  first  time,  it  is  highly  recommended  for  users  to  change  the  
default  password  "admin"  to  a  more  complicated  password  for  security  purpose.  Follow  the  steps  below  to  
change  the  Web  UI  access  password.  
 
1.   Go  to  Web  UI-­>Settings-­>Change  Password  page.  
2.   Enter  the  old  password  first.  
3.   Enter  the  new  password  and  re-­type  the  new  password  to  confirm.  The  new  password  has  to  be  at  
least  4  characters.  The  maximum  length  of  the  password  is  30  characters.  
4.   Click  on  "Save"  and  the  user  will  be  automatically  logged  out.  
5.   Once   the   web   page   comes   back   to   the   login   page   again,   enter   the   username   "admin"   and   the   new  
password  to  login.  
 
LDAP   S ERVER  
 
The  UCM6100  has  an  embedded  LDAP  server  for  users  to  manage  corporate  phonebook  in  a  centralized  
manner.  
 
By   default,   the   LDAP   server   has   generated   the   first   phonebook   with   PBX   DN  
•  
"ou=pbx,dc=pbx,dc=com"  based  on  the  UCM6100  user  extensions  already.  
Firmware  Version  1.0.9.26  
 
Configure   the   number   of   authentication   failures   during   "Max   Retry   Duration"  
before  the  host  is  banned.  The  default  setting  is  10.  
Configure  IP  address,  CIDR  mask  or  DNS  host  in  the  whiltelist.  Fail2Ban  will  not  
ban  the  host  with  matching  address  in  this  list.  Up  to  5  addresses  can  be  added  
into  the  list.  
Enable   A sterisk  service  for  Fail2Ban.  The  default  setting  is  disabled.  Please  make  
sure  both  "Enable  Fail2Ban"  and  "Asterisk  Service"  are  turned  on  in  order  to  use  
Fail2Ban  for  SIP  authentication  on  the  UCM6100.  
Configure  the  listening  port  number  for  the  service.  Currently  only  5060  (for  UDP)  
is  supported.  
Configure   the   number   of   authentication   failures   during   "Max   Retry   Duration"  
before  the  host  is  banned.  The  default  setting  is  10.  Please  make  sure  this  option  
is   properly   configured   as   it   will   override   the   "MaxRetry"   value   under   "Global  
Settings".    
UCM6100  Series  IP  PBX  User  Manual  
 
 
Page  71  of  304    

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents