Response Timeout Prompt
Invalid Prompt
Response Timeout Repeat
Loops
Invalid Repeat Loops
Language
Key Pressing Events
Key Press Event:
Press 0
Press 1
Press 2
Press 3
Press 4
Press 5
Press 6
Press 7
Press 8
Press 9
Press *
Timeout
Invalid
Firmware Version 1.0.9.26
the timeout, a timeout prompt will be played. The default setting is 10
seconds.
Select the prompt message to be played when timeout occurs.
Select the prompt message to be played when an invalid extension is
pressed.
Configure the number of times to repeat the prompt if no DTMF input is
detected. When the loop ends, it will go to the timeout destination if
configured, or hang up. The default setting is 3.
Configure the number of times to repeat the prompt if the DTMF input is
invalid. When the loop ends, it will go to the invalid destination if
configured, or hang up. The default setting is 3.
Select the voice prompt language to be used for this IVR. The default
setting is "Default" which is the selected voice prompt language under
web GUI->PBX->Internal Options->Language. The dropdown list
shows all the current available voice prompt languages on the UCM6100.
To add more languages in the list, please download voice prompt
package
by
selecting
GUI->PBX->Internal Options->Language.
Select the event for each key pressing for 0-9, *, Timeout and Invalid. The
event options are:
Extension
•
Voicemail
•
Conference Rooms
•
Voicemail Group
•
IVR
•
Ring Group
•
Queues
•
Page Group
•
Fax
•
Custom Prompt
•
Hangup
•
DISA
•
Dial By Name
•
External Number
•
Callback
•
UCM6100 Series IP PBX User Manual
"Check
Prompt
List"
under
web
Page 185 of 304