Conference Bridge; Conference Bridge Configurations; Table 59: Conference Bridge Configuration Parameters - Grandstream Networks UCM6100 Series User Manual

The UCM6100 supports conference bridge allowing multiple bridges used at the same time:
UCM6102/6104 supports up to 3 conference bridges allowing up to 25 simultaneous PSTN or IP
•
participants.
UCM6108/6116 supports up to 6 conference bridges allowing up to 32 simultaneous PSTN or IP
•
participants.
The conference bridge
Features-­>Conference. In this page, users could create, edit, view, invite, manage the participants and
delete conference bridges. The conference bridge status and conference call recordings (if recording is
enabled) will be displayed in this web page as well.
CONFERENCE B RIDGE C ONFIGURATIONS
Click on "Create New Conference Room" to add a new conference bridge.
•
Click on to edit the conference bridge.
•
Click on to delete the conference bridge.
•
Extension
Password
Admin Password
Firmware Version 1.0.9.26
CONFERENCE B RIDGE
configurations can
Table 59: Conference Bridge Configuration Parameters
Configure the conference number for the users to dial into the
conference.
When configured, the users who would like to join the conference call
must enter this password before accessing the conference bridge.
Note:
If "Public Mode" is enabled, the password is not required to join the
•
conference bridge thus this field is invalid.
The password has to be at least 4 characters.
•
Configure the password to join the conference bridge as administrator.
Conference administrator can manage the conference call via IVR (if
"Enable Caller Menu" is enabled) as well as invite other parties to join the
conference by dialing "0" (permission required from the invited party) or
"1" (permission not required from the invited party) during the conference
call.
UCM6100 Series IP PBX User Manual
be accessed under Web GUI-­>PBX-­>Call
Page 178 of 304