Click on
to edit the paging/intercom group.
•
Click on
to delete the paging/intercom group.
•
Click on "Paging/Intercom Group Settings" to edit A lert-Info Header. This header will be included in the
•
SIP INVITE message sent to the callee in paging/intercom call.
The UCM6100 has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81
•
and the Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the
"Paging/Intercom Group Settings" dialog. Or users could go to Web GUI->PBX->Internal
Options->Feature Codes directly.
Firmware Version 1.0.9.26
Figure 117: Page/Intercom Group Settings
UCM6100 Series IP PBX User Manual
Page 203 of 304