Figure 87: Ucm6100 Fxo Tone Settings; Figure 88: Ucm6100 Pstn Detection - Grandstream Networks UCM6100 Series User Manual
Ip pbx
Hide thumbs
Also See for UCM6100 Series:
- User manual (418 pages) ,
- Manual manual (24 pages) ,
- Configuration (19 pages)
Table of Contents
Advertisement
4. Click on "Detect" to start PSTN detection.
If there are two FXO ports connected to PSTN lines, use the following settings for auto-detection.
•
Detect Model: A uto Detect.
Source Channel: The source channel to be detected.
Destination Channel: The channel to help detecting. For example, the second FXO port.
Destination Number: The number to be dialed for detecting. This number must be the actual
PSTN number for the FXO port used as the destination channel.
Firmware Version 1.0.9.26
Figure 87: UCM6100 FXO Tone Settings
Figure 88: UCM6100 PSTN Detection
UCM6100 Series IP PBX User Manual
Page 151 of 304
Advertisement
Table of Contents
Troubleshooting
