Grandstream Networks UCM6100 Series User Manual page 100

Ip pbx
Hide thumbs Also See for UCM6100 Series:
Table of Contents

Advertisement

LDAP  Phonebook  
Source  
Address  
Port  
Base  DN  
User  Name  
Password  
Number  Filter  
Name  Filter  
Version  
Name   A ttribute  
Number   A ttribute  
Display  Name  
Max  Hits  
Search  Timeout  
Firmware  Version  1.0.9.26  
 
Select  "Manual"  or  "PBX"  as  the  LDAP  configuration  source.  
If  "Manual"  is  selected,  the  LDAP  configuration  below  will  be  applied  
•  
to  the  SIP  end  device.  
If   "PBX"   is   selected,   the   LDAP   configuration   built-­in   from   UCM6100  
•  
web  UI-­>Settings-­>LDAP  Server  will  be  applied.  
Configure  the  IP  address  or  DNS  name  of  the  LDAP  server.  
Configure  the  LDAP  server  port.  The  default  value  is  389.  
This   is   the   location   in   the   directory   where   the   search   is   requested   to  
begin.  Example:  
dc=grandstream,  dc=com  
•  
ou=Boston,  dc=grandstream,  dc=com  
•  
Configure  the  bind  "Username"  for  querying  LDAP  servers.  The  field  can  
be  left  blank  if  the  LDAP  server  allows  anonymous  binds.  
Configure  the  bind  "Password"  for  querying  LDAP  servers.  The  field  can  
be  left  blank  if  the  LDAP  server  allows  anonymous  binds.  
Configure  the  filter  used  for  number  lookups.  Please  refer  to  user  manual  
for  more  details.  
Configure  the  filter  used  for  name  lookups.  Please  refer  to  user  manual  
for  more  details.  
Select  the  protocol  version  for  the  phone  to  send  the  bind  requests.  The  
default  value  is  3.  
Specify   the   "name"   attributes   of   each   record   which   are   returned   in   the  
LDAP  search  result.  Example:  
gn  
•  
cn  sn  description  
•  
Specify  the  "number"  attributes  of  each  record  which  are  returned  in  the  
LDAP  search  result.  Example:  
telephoneNumber  
•  
telephoneNumber  Mobile  
•  
Configure   the   entry   information   to   be   shown   on   phone's   LCD.   Up   to   3  
fields  can  be  displayed.  Example:  
%cn  %sn  %telephoneNumber  
•  
Specify   the   maximum   number   of   results   to   be   returned   by   the   LDAP  
server.  Valid  range  is  1  to  3000.  The  default  value  is  50.  
Specify  the  interval  (in  seconds)  for  the  server  to  process  the  request  and  
client  waits  for  server  to  return.  Valid  range  is  0  to  180.  The  default  value  
is  30.  
UCM6100  Series  IP  PBX  User  Manual  
 
 
Page  99  of  304    

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents