Global Configuration; Global Policy; Figure 62: Discovered Devices - Grandstream Networks UCM6100 Series User Manual

The following figure shows a list of discovered phones. The MAC address, IP Address, Extension (if
assigned), Version, Vendor, Model, Connection Status, Create Config, Options (Edit/Delete/Update) are
displayed in the list.
GLOBAL C ONFIGURATION
GLOBAL P OLICY
Global configuration will apply to all the connected Grandstream SIP end point devices in the same LAN
with the UCM6100 no matter what the Grandstream device model it is. It is divided into two levels:
Web UI-­>PBX-­>Zero Config-­>Global Policy
•
Web UI-­>PBX-­>Zero Config-­>Global Templates.
•
Global Templates configuration has higher priority to Global Policy configuration.
•
Global Policy can be accessed in web GUI-­>PBX-­>Zero Config-­>Global Policy page. On the top of the
configuration table, users can select category in the "Options" dropdown list to quickly navigate to the
category. The categories are:
Localization: configure display language, data and time.
•
Phone Settings: configure dial plan, call features, NAT, call progress tones and etc.
•
Contact List: configure LDAP and XML phonebook download.
•
Maintenance: configure upgrading, web access, Telnet/SSH access and syslog.
•
Network Settings: configure IP address, QoS and STUN settings.
•
Customization: customize LCD screen wallpaper for the supported models.
•
Select the checkbox on the left of the parameter you would like to configure to active the dropdown list for
this parameter.
Firmware Version 1.0.9.26
Figure 62: Discovered Devices
UCM6100 Series IP PBX User Manual Page 96 of 304