Figure 150: Announcements Center Code Configuration; Figure 151: Announcements Center Example - Grandstream Networks UCM6100 Series User Manual

6. Give a name to the newly created A nnouncement Center.
7. Specify the code which will be used with group number to send the voice message to.
8. Select the message that will be used by the code from the Custom Prompt drop down menu. To create
a new Prompt, please click "Prompt" link and follow the instructions in that page.
Code and Group number are used together to direct specified message to the target group. A ll extensions
in the group will receive the message. For example, we can send code 55 to group 666 by dialing 55666
from any extension registered to the UCM6100. A ll the members in group 666 which are extension 1000,
1001 and 1002 will receive this voice message after they pick up the call.
Firmware Version 1.0.9.26
Figure 150: Announcements Center Code Configuration
Figure 151: Announcements Center Example
UCM6100 Series IP PBX User Manual Page 267 of 304