Model Templates; Model Update; Figure 66: Template Management - Grandstream Networks UCM6100 Series User Manual

Click on Save when done. The model template will be displayed on web UI-­>PBX-­>Zero
•
Config-­>Model Templates page.
Click on to delete the model template or click on "Delete Selected Templates" to delete multiple
•
selected templates at once.
Click on "Toggle Selected Template(s)" to toggle the status between enabled/disabled for the selected
•
model templates.
MODEL U PDATE
UCM6100 zero config feature supports provisioning all models of Grandstream SIP end devices.
Templates for most of the Grandstream models are built in with the UCM6100 already. Templates for GS
Wave and Grandstream surveillance products require users to download and install under web
UI-­>PBX-­>Zero Config-­>Model Update first before they are available in the UCM6100 for selection. A fter
downloading and installing the model template to the UCM6100, it will show in the dropdown list for
"Model" selection when editing the model template.
Click on to download the template.
•
Click on to upgrade the model template. Users will see this icon available if the device model has
•
template updated in the UCM6100.
In case the UCM6100 is placed in the private network and Internet access is restricted, users will not be
able to get packages by downloading and installing from the remote server. Model template package can
be manually uploaded from local device through web UI. Please contact Grandstream customer support if
the model package is needed for manual uploading.
Firmware Version 1.0.9.26
Figure 66: Template Management
UCM6100 Series IP PBX User Manual Page 108 of 304