Login Timeout Settings; Figure 57: Login Timeout Settings - Grandstream Networks UCM6100 Series User Manual

-­ All: Copy all recording files to the external device.
LOGIN T IMEOUT S ETTINGS
After the user logs in the UCM6100 web UI, the user will be automatically logged out after certain timeout.
This timeout value can be specified under UCM100 web GUI-­>Settings-­>Login Timeout Settings page.
The "User Login Timeout" value is in minute and the default setting is 10 minutes. If the user doesn't make
any operation on web UI within the timeout, the user will be logged out automatically. A fter that, the web UI
will be redirected to the login page and the user will need to enter username and password to log in.
If set to 0, there is no timeout for the web UI login session and the user will not be automatically logged out.
Figure 57: Login Timeout Settings
Firmware Version 1.0.9.26 UCM6100 Series IP PBX User Manual Page 89 of 304