Analog Station: Select FXS port to be assigned to the extension. By default, it's set to "None".
•
Once selected, analog related settings for this extension will show up in "Analog Settings"
•
section.
7. Go to web GUI->PBX->Basic/Call Routes->Inbound Routes page.
8. Create an inbound route to use the Fax analog trunk. Select the created extension for Fax machine in
step 4 as the default destination.
Firmware Version 1.0.9.26
Figure 126: Configure Extension for Fax Machine
Figure 127: Configure Inbound Rule for Fax
UCM6100 Series IP PBX User Manual
Page 216 of 304