Grandstream Networks UCM6100 Series User Manual page 22

Added payload configuration for audio/video codecs. [INTERNAL OPTIONS/PAYLOAD]
•
Added activity calls status on web UI status page.
•
Added CDR A PI support. [API CONFIGURATION]
•
Added more alert events support such as Register SIP Failed, Register SIP Trunk Failed, Restore
•
Config, User Login Success, User Login Failed, SIP Internal Call Failure and etc. [ALERT
EVENTS LIST]
FIRMWARE V ERSION 1 .0.5.19
Added built-­in data migration tool to support upgrading from 1.0.4.7 to 1.0.5.19 without factory
•
reset.
Added "Direct Dial Voicemail Prefix" feature code back. [Table 75: UCM6100 Feature Codes]
•
Changed valid range for option "Current Disconnect Threshold". [Table 48: Analog Trunk
•
Configuration Parameters]
FIRMWARE V ERSION 1 .0.5.14
New backend data structure and web UI performance improvement. 1.0.5.14 is not compatible
•
with previous firmware versions. Once upgraded to 1.0.5.14, the device needs to be FULLY
RESET and RE-­CONFIGURED MANUALLY.
Added traditional Chinese language for web UI. [WEB GUI LANGUAGES]
•
Updated LDAP configuration example. [LDAP SERVER]
•
Added "Enable Filter Source Caller ID" and "Custom Dynamic Route" options for outbound route
•
settings. [Table 57: Outbound Route Configuration Parameters]
Added more language support for voice prompt. [LANGUAGE SETTINGS FOR VOICE PROMPT]
•
Added "Ring Group Destination" for ring group configuration. [Table 66: Ring Group Parameters]
•
Added "Extension Groups" section in web UI. [EXTENSION GROUPS]
•
Added "Pickup Groups" section in web UI. [PICKUP GROUPS]
•
Added BLF function description. [BLF A ND EVENT LIST]
•
Updated default extension range. [Table 76: Internal Options/General]
•
Added sample descriptions for downloaded CDR file. [DOWNLOADED CDR FILE]
•
FIRMWARE V ERSION 1 .0.4.7
Asterisk updated to version 1.8.23.1.
•
Added DID routing support for incoming calls. [Table 50: Create New SIP Trunk]
•
Added DOD routing support. [DIRECT OUTWARD DIALING (DOD)]
•
Added GXP one-­button Voicemail access. [Table 34: SIP Extension Configuration Parameters]
•
Firmware Version 1.0.9.26 UCM6100 Series IP PBX User Manual Page 21 of 304