Table 53: Create New Iax Trunk; Table 54: Iax Register Trunk Configuration Parameters - Grandstream Networks UCM6100 Series User Manual

CC Max A gents
CC Max Monitors
Type
Provider Name
Host Name
Keep Trunk CID
Username
Password
Disable This Trunk
Basic Settings
Provider Name
Host Name
Keep Trunk CID
Disable This Trunk
Caller ID
Firmware Version 1.0.9.26
is available, given that a previous call to that party failed for some reason.
Configure the maximum number of CCSS agents which may be allocated
for this channel. In other words, this number serves as the maximum
number of CC requests this channel is allowed to make. The minimum
value is 1.
Configure the maximum number of monitor structures which may be
created for this device. In other words, this number tells how many callers
may request CC services for a specific device at one time. The minimum
value is 1.
Table 53: Create New IAX Trunk
Select the VoIP trunk type.
Peer IAX Trunk
•
Register IAX Trunk
•
Configure a unique label to identify this trunk when listed in outbound
rules, inbound rules and etc.
Configure the IP address or URL for the VoIP provider's server of the
trunk.
If enabled, the trunk CID will not be overridden by extension's CID when
the extension has CID configured. The default setting is "No".
Enter the username to register to the trunk from the provider when
"Register IAX Trunk" type is selected.
Enter the password to register to the trunk from the provider when
"Register IAX Trunk" type is selected.
If selected, the trunk will be disabled.
Table 54: IAX Register Trunk Configuration Parameters
Configure a unique label to identify this trunk when listed in outbound
rules, inbound rules and etc.
Configure the IP address or URL for the VoIP provider's server of the
trunk.
If enabled, the trunk CID will not be overridden by extension's CID when
the extension has CID configured. The default setting is "No".
If selected, the trunk will be disabled.
Configure the Caller ID. This is the number that the trunk will try to use
when making outbound calls. For some providers, it might not be possible
to set the CallerID with this option and this option will be ignored.
UCM6100 Series IP PBX User Manual Page 161 of 304