Global Templates can be accessed in web GUI->PBX->Zero Config->Global Templates. Users can
create multiple global templates with different sets of configurations and save the templates. Later on,
when the user configures the device in Edit Device dialog->Advanced Settings, the user can select to use
one of the global template for the device. Please refer to section
using the global templates.
When creating global template, users can select the categories and the parameters under each categories
to be used in the template. The global policy and the selected global template will both take effect when
generating the config file. However, the selected global template has higher priority to the global policy
when it comes to the same setting option/field. If the same option/field has different value configured in the
global policy and the selected global template, the value for this option/field in the selected global template
will override the value in global policy.
Click on "Create New Template" to add a global template. Users will see the following configurations.
Template Name
Description
Active
Click on
to edit the global template.
•
The window for editing global template is shown in the following figure. In the "Options" field, after
entering the option name key word, the options containing the key word will be listed. Users could then
select the options to be modified and click on "Add Option" to add it into the global template.
Firmware Version 1.0.9.26
Table 32: Create New Template
Create a name to identify this global template.
Provide a description for the global template. This is optional.
Check this option to enable the global template.
UCM6100 Series IP PBX User Manual
for more details on
[MANAGE DEVICES]
Page 104 of 304