Figure 76: Zero Config Sample - Global Policy - Grandstream Networks UCM6100 Series User Manual
Ip pbx
Hide thumbs
Also See for UCM6100 Series:
- User manual (418 pages) ,
- Manual manual (24 pages) ,
- Configuration (19 pages)
Table of Contents
Advertisement
3. Go to web GUI->PBX->Zero Config->Model Templates, create a new model template "English
Support Template" for GXP2140. Add option "Language" and set it to "English". Then select the option
"Default Model Template" to make it the default model template.
4. Go to web GUI->PBX->Zero Config->Model Templates, create another model template "Spanish
Support Template" for GXP2140. A dd option "Language" and set it to "Español".
5. After 9 devices are powered up and connected to the LAN network, use "Auto Discover" function or
"Create New Device" function to add the devices to the device list on web UI->PBX->Zero
Config->Zero Config.
6. On web GUI->PBX->Zero Config->Zero Config page, users could identify the devices by their MAC
addresses or IP addresses displayed on the list. Click on
7. For each of the 5 phones used by English speaking customer support, in "Basic" settings select an
available extension for account 1 and click on "Save". Then click on "Advanced" settings tab to bring
Firmware Version 1.0.9.26
Figure 76: Zero Config Sample - Global Policy
UCM6100 Series IP PBX User Manual
to edit the device settings.
Page 117 of 304
Advertisement
Table of Contents
Troubleshooting
