Table 3: Lcd Menu Options - Grandstream Networks UCM6100 Series User Manual

View Events
Device Info
Network Info
Network Menu
Factory Menu
Firmware Version 1.0.9.26
Table 3: LCD Menu Options
Critical Events
•
Other Events
•
Hardware: Hardware version number
•
Software: Software version number
•
P/N: Part number
•
WAN MAC: WAN side MAC address (UCM6102 only)
•
LAN MAC: LAN side MAC address
•
Uptime: System up time
•
For UCM6104/UCM6108/UCM6116:
LAN Mode: DHCP, Static IP, or PPPoE
•
LAN IP: IP address
•
LAN Subnet Mask
•
For UCM6102:
WAN Mode: DHCP, Static IP, or PPPoE
•
WAN IP: IP address
•
WAN Subnet Mask
•
LAN IP: IP address
•
LAN Subnet Mask
•
For UCM6104/UCM6108/UCM6116:
LAN Mode: Select LAN mode as DHCP, Static IP or PPPoE
•
Static Route Reset: Click to reset the static route setting
•
For UCM6102:
WAN Mode: Select WAN mode as DHCP, Static IP or PPPoE
•
Static Route Reset: Click to reset the static route setting
•
Reboot
•
Factory Reset
•
LCD Test Patterns
•
Press "OK" to start. Then press "Down" button to test different LCD
patterns. When done, press "OK" button to exit.
Fan Mode
•
Select "Auto" or "On".
LED Test Patterns
•
UCM6100 Series IP PBX User Manual Page 38 of 304