Table 2: Ht801/Ht802 Fxs Analog Telephone Adapter Technical Specifications - Grandstream Networks HT801 User Manual

Table 2: HT801/HT802 FXS Analog Telephone Adapter Technical Specifications

Interfaces
Telephone Interfaces One (1) RJ11 FXS port
Network Interface One (1) 10/100Mbps auto-sensing Ethernet port (RJ45).
POWER, INTERNET, PHONE
LED Indicators
Factory Reset Button Yes.
Voice, Fax, Modem
Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
Telephony Features
hold, do not disturb, 3-way conference.
G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726,
Voice Codecs
iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation.
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for
Fax over IP
Fax Pass-through.
Short/Long Haul
2 REN: Up to 1km on 24 AWG.
Ring Load
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID.
Busy Tone, Polarity Reversal/Wink, Loop Current.
Disconnect Methods
Signaling
TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP,
Network Protocols
TFTP, TELNET, STUN, SIP (RFC3261), SIP over TCP/TLS, SRTP, TR-069.
QoS Layer 2 (802.1Q VLAN, SIP/RTP 802.1p) and Layer 3 (ToS, DiffServ, MPLS).
DTMF Methods In-audio, RFC2833 and/or SIP INFO.
Provisioning and HTTP, HTTPS, TELNET, TFTP, TR-069, secure and automated provisioning
Control using AES encryption, syslog.
Security
Media SRTP.
Control TLS/SIPS/HTTPS.
Management Syslog support, telnet, remote management using web browser.
Physical
Input: 100-240VAC, 50-60Hz.
Universal Power
Supply Output: 5.0VDC/1.0A.
HT801
Two (2) RJ11 FXS ports.
POWER,
PHONE2.
HT801
HT801
HT801
HT801
HT801/HT802 User Guide
HT802
INTERNET, PHONE1,
HT802
HT802
HT802
HT802
P a g e | 11