DataKinetics DSC110 User Manual page 99

7.16.26 Configuration Time And Date Print
CNTDP Configuration Time And Date Print
This command is used print out the system date and time.
Syntax CNTDP;
Attributes
Example CNTDP;
1998-10-03 09:04:02
EXECUTED
7.16.27 Timeout Value Set
CNTOS Configuration Timeout Value Set
This command is used to change the value of a timer for a particular signalling
system. Note some signalling system timer values are not changeable.
Syntax CNTOS:TTYPE=,TO=,{TSEC=|TMSEC=};
Attributes CONFIG
Example CNTOS:TTYPE=CONV,TO=7,TSEC=30;
7.16.28 Configuration Timeout Value Print
CNTOP Configuration Timeout Value Print
This command is used to print the value of either a single timer or all the timers for a
particular protocol module.
Syntax CNTOP:TTYPE=,[TO=,];
Attributes
Example CNTOP:TTYPE=ISUP,TO=7;
CNTOP:TTYPE=TUP;
Output Format
Timeout Values:
TTYPE TO TSEC
CONV 1 60
CONV 2 360
CONV 3 120
CONV 4 360
CONV 5 5
CONV 6 5
CONV 7 3
CONV 8 5
CONV 10 60
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12
TMSEC
Page 99