7.22.3 Remote Data Centre Continuous Data Print
RDCDP
Remote Data Centre Continuous Data Print
This command prints out the circuit groups or outgoing routes associated with a
continuous record.
The command will print out either a list of points of origin or outgoing routes
depending on the continuous record type for the report.
Prerequisites
The continuous record has been initiated.
Syntax
RDCDP:RECORD=;
Attributes
CONFIG, RDC
Example
RDCDP:RECORD=1;
Remote Data Centre Continuous Data
RECORD POR
1
1
1
2
1
3
1
5
1
8
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12
Page 129