DataKinetics DSC110 User Manual page 91

7.16.11 Configuration Monitor End
CNMOE Configuration Monitor End
This command ends the monitoring of an object. An object is currently only an
signalling link.
Prerequisites The C7LINK or ASLINK is being monitored.
Syntax CNMOE:{[ASLINK=]|[C7LINK=]};
Attributes CONFIG
Example CNMOE:ASLINK=1;
7.16.12 Configuration Monitor Print
CNMOP Configuration Monitor Print
This command is used to obtain a print out of the objects being monitored. An
object is currently only a signalling link.
For signalling the STS will monitor information sent from the EQU of the signalling
link and the RTS will monitor information received by the signalling link.
Syntax CNMOP;
Attributes None
Example CNMOP;
Output format
Monitoring Configuration
ASLINK C7LINK STS
1 19-1-1
3 19-1-3
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12
RTS
19-1-2
19-1-4
Page 91