DataKinetics DSC110 User Manual page 45

BWM Backwards mode
0 – No action
1- Generate early address complete
message on determination of
completion of sending digits.
C7LINK Logical reference for an SS7 signalling
link.
C7RT Logical reference of an SS7 route.
CC Clearing Cause mapping.
Format :- xx-yy
xx = mapping table for received
external release values
yy = mapping table for sent external
release values.
Zero means provide default mapping.
See Section 7.11.2 for a description of
the mapping algorithms.
CDDL The number of prefix digits to be
deleted from the called party number.
CDMD Reserved.
CDNA Called party number nature of address
mode. See 7.11.11
CDNP Called party number numbering plan
mode. See 7.11.12
CDPRE Prefix digits to be added to the called
party number.
CDST The start moment i.e. The number of
called party digits that have to be
received before routing can occur.
Zero indicates that a stop digit must be
received before routing can occur.
CGDL The number of prefix digits to be
deleted from the calling party number.
CGCB Calling party number blocking mode
Used to manipulate the CBI blocking
indicator used in UK ISUP:-
0 – If present transit the blocking
indication otherwise set it to indicate
no blocking information.
1 – If present transit the blocking
indication otherwise set it to indicate
blocking available.
2 – Set the blocking indicator to no
blocking information.
3 – Set the blocking indicator to
blocking available.
DataKinetics DSC110 / DSC210 User Manual Issue 12
0:1 Default = 0
1:16
1:32
xx – 0:99 Default = 0-0
yy – 0:99
0:22 Default = 0
0 Default = 0
0:7 Default = 0
0:7 Default = 0
0:16 digits Default = 0
digits
0:22 Default = 1
0:22 Default = 0
0:3 Default = 0
Page 45