Mechanical - Dsc210 - DataKinetics DSC110 User Manual

4.2 Mechanical – DSC210
The DSC210 is designed for 19 inch rack mounting and is provided with slides to
allow top access for maintenance purposes. No side access is required. All cable
connections are at the rear of the equipment and are described in Section 5.
The DSC210 is intended for use with an extending cable carrier that should be
attached between the rear of the 19 inch rack and the converter. All cables should
then be attached to the carrier that extends and retracts as the converter is moved
forward and backwards on its slides.
The chassis contains 20 board positions and cards are positioned as detailed in
the following table. The board position numbers are marked along the front of the
board slots and on the rear panel of the converter.
BOARD POSITION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
DataKinetics DSC110 / DSC210 User Manual Issue 12
Alarm Card
Network Card
Central Processor Card
Solid State Memory Card
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Signalling Processor CS6
Table 4.2 DSC210 Internal Layout
CARD
Page 22