Periodic Reporting - DataKinetics DSC110 User Manual

12.1.3 Unsolicited Alarm Recording
Alarms are stored as an alarm log on the converter. A continuous record of these
alarms can also be sent to a remote data centre.

12.2 Periodic Reporting

Periodic reports can be configured to support the transfer to an RDC of data at
User defined intervals, typically allowing, for example, hourly reports of traffic
measurements on a per group basis. The reports are formatted as a CSV file.
12.2.1 Circuit Group Traffic Measurements
Measurements collected on a per group basis can be transferred periodically to
the RDC. These measurements can optionally be reset at the expiry of each
interval.
12.2.2 Outgoing Route Traffic Measurements
Measurements collected on a per-outgoing route basis can be transferred
periodically to the RDC. These measurements can optionally be reset at the expiry
of each interval.
DataKinetics DSC110 / DSC210 User Manual Issue 12 Page 188