DataKinetics DSC110 User Manual page 95

7.16.19 Configuration Remote Data Centre End
CNRDE Configuration Remote Data Centre End
This command is used to end a Remote Data Centre.
Prerequisites The Remote Data Centre is already initiated.
The Remote Data Centre is blocked.
The Remote Data Centre is not attached to a continuous record or periodic report.
Syntax CNRDE:RDC=;
Attributes CONFIG
Example CNRDE:RDC=1;
7.16.20 Configuration Remote Data Centre Print
CNRDP Configuration Remote Data Centre Print
This command is used to print out the Remote Data Centre parameters.
The password is not printed.
Syntax CNRDP;
Attributes
Example CNRDP;
Remote Data Centre Configuration
RDC IPADDR
1 25.03.203.52
2 102.03.211.140
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12
USER PASSWORD
JOHN ********
JOHN ********
LABEL
PRIMARY
SECONDARY
Page 95