DataKinetics DSC110 User Manual page 51

L1 The setting of the layer 1 protocol
indication in the bearer capability.
Format x-y
x – processing for received values
y – processing for sent values
0 – Pass layer 1 protocol transparently.
1 – Force layer 1 protocol to indicate
A-Law.
2 – Force layer1 protocol to indicate
Mu-law
L2K Layer 2 K window size
LABEL Text label.
LC PCM line coding.
LINES Lines per Page.
LSH Load share across linksets
LS Logical reference of an SS7 Link set
which can contain a number of
signalling links.
LS1 Primary linkset associated with an SS7
Route.
LS2 Secondary linkset associated with an
SS7 Route.
LSSIZE Maximum number of SS7 links allowed
in the linkset.
LSM Local service mode.
See 7.11.14
LSTAB Table id used by local service control
M56K 56kbits Signalling Mode:-
0 – 56kbits/s mode disabled (64 kbits/s
used).
1 – 56kbits/s enabled (bit 8 not used).
2 – 56kbits/s enabled (bit 7 not used).
N.B. mode 2 may be usedfor 48kbits/s
operation when configured on a special
48kbits/s board.
MESSAGE Text message
The minimum number of records held
MINREC
by the converter before transfer.
NEXT Next Route index for a route to a
particular destination.
Zero indicates that there is no route.
DataKinetics DSC110 / DSC210 User Manual Issue 12
x:0:2 Default = 0-0
y:0:2
1,7 Default=7
0:12 <text
character>
HDB3, Default =
AMI,
HDB3 for E1
B8ZS
B8ZS for T1
10:99 Default = 25
Y,N Default = N
1:8
1:8
1:8
1:2
0,1-4 Default = 0
0,1-50 Default = 0
0:4 Default = 0
M56K modes
3 and 4 can
only be set on
boards with
SIGTYPE=SS
7
0:24 <text
character> or
space.
100:200
0,1:90 Default = 0
Page 51