DataKinetics DSC110 User Manual page 140

7.23.3 Routing Digit Analysis End
RTDAE
Syntax
Prerequisites
Attributes
Example
7.23.4 Routing Digit Analysis Print
RTDAP Routing Digit Analysis Print
This command is used to obtain a print out of digit analysis indices and digit tree
combinations. If no digit analysis index, secondary point of origin or outgoing route is
specified then all combinations are output.
Syntax RTDAP:[DAI=,|OGR=|SPOR=];
Prerequisites If specified, the digit analysis index, secondary point of origin or outgoing route must
already have been initiated.
Attributes
Example RTDAP:DAI=1;
RTDAP:OGR=5
RTDAP:SPOR=2;
RTDAP;
Output format
Digit Analysis Mapping
DAI DIGS
1 01725
1 01425
2 0800
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12
Routing Digit Analysis End
This command is used to end a digit analysis mapping.
RTDAE:DAI=,DIGS=;
The digit analysis index and digit string combination must already have been
initiated.
If this is the only digit analysis index and digit string combination for the digit
analysis index then there can be no point of origin using this digit analysis index.
If the outgoing route involved is circuit mapped then the circuit groups involved
must be blocked.
CONFIG
RTDAE:DAI=2,DIGS=01425;
OGR SPOR
4 0
5 0
0 1
Page 140