DataKinetics DSC110 User Manual page 112

7.18.3 CCS SS7 Link Set End
C7LSE CCS SS7 Link Set End
This command is used to end the SS7 linkset.
Syntax C7LSE:LS=;
There should be no signalling links attached to the linkset.
Prerequisites
All configured SS7 links must be blocked.
There are no C7 Routes using this linkset.
Attributes CONFIG
Example C7LSE:LS=1;
7.18.4 CCS SS7 Link Set Print
C7LSP CCS SS7 Link Set Print
This command obtains a print-out of the attributes for the SS7 linkset. If no link is
specified then the values for all linksets are shown.
Syntax C7LSP:[LS=,];
Attributes None
Example C7LSP;
Output format
CCS SS7 Link Set
LS OPC DPC
1 1 3
2 2 4
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12
LSSIZE SS7MODE NI DUAL
2 ITU14 2 0
1 ANSI 2 0
Page 112