DataKinetics DSC110 User Manual page 114

7.18.7 CCS SS7 Route End
C7RTE CCS SS7 Route End
This command is used to end an SS7 Signalling Route.
Syntax C7RTE:C7RT=;
All SS7 signalling links must be blocked.
Prerequisites
The specified route has already been initiated.
There are no circuit groups using the SS7 route.
Attributes CONFIG
Example C7RTE:C7RT=1;
7.18.8 CCS SS7 Route Print
C7RTP CCS SS7 Route Print
This command shows the attributes of the specified SS7 Route. If no route is
specified, then the values for all routes are shown.
Syntax C7RTP:[C7RT=];
Attributes None
Example C7RTP;
Output format
CCS SS7 Signalling Route Configuration
C7RT DPC
1 2
2 3
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12
LS1 LS2 LSH LABEL
1 3 Y LONDON
2 4 N EDINBURGH
Page 114