Remote Data Centre - DataKinetics DSC110 User Manual

7.22 Remote Data Centre

7.22.1 Remote Data Centre Continuous Data Initiate
RDCDI Remote Data Centre Continuous Data Initiate
This command attaches a point of origin (for call failure records) or outgoing route
(for billing records) to a continuous record.
Prerequisites The record has already been initiated.
The specified point of origin or outgoing route has already been initiated.
Points of origin can only be specified for CFL records.
Outgoing routes can only be specified for BILLING records.
The point of origin or outgoing route must not already be attached to another
record.
An association between the record and the point of origin or route has not already
been initiated.
Data cannot be initiated for alarm continuous records.
Syntax RDCDI:RECORD=,{[POR=...,]|[OGR=...,]}
Attributes CONFIG, RDC
Example RDCDI:RECORD=1,OGR=1;
7.22.2 Remote Data Centre Continuous Data End
RDCDE Remote Data Centre Continuous Data End
This command ends the attachment between a point of origin or outgoing route to
a continuous record
Prerequisites The record has already been initiated.
The specified point of origin or outgoing route has already been initiated.
An association between the record and the point of origin or route has already
been initiated.
Syntax RDCDE:RECORD=,{[POR=...,]|[OGR=...,]};
Attributes CONFIG, RDC
Example RDCDE:RECORD=1,POR=1;
DataKinetics DSC110 / DSC210 User Manual Issue 12 Page 128