Status - DataKinetics DSC110 User Manual

7.24 Status

7.24.1 Status Access Link Print
STASP Status Access Link Print
This command requests a status report of the Access Side signalling links.
Syntax STASP:[ASLINK=...];
Attributes None.
Example STASP:ASLINK=1;
STASP;
Output format
Access Side Link Status
ASLINK EQU TS
3 5-1 6-1-1
4 5-2 6-1-2
5 6-1 6-1-3
EXECUTED
7.24.2 Status Board Print
STBOP Status Board Print
This command requests a status report of boards on the system.
Syntax STBOP:[BPOS=...];
Prerequisites If specified the board should already have been initiated.
Attributes None.
Example STCGP:BPOS=5;
Output format
Board Status
BPOS STATUS
5 Active
6 Active
7 Blocked
20 Failed
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12
L3 STATUS L2 Status
Blocked
Active OK
Active TEI Assigned
Page 151