DataKinetics DSC110 User Manual page 60

7.11.3 Calling Party Number Modes
The following are the allowed calling party number modes:-
CGMD
0 Do not pass on the calling party number. Generate calling party number from prefix digits
and use parameters from the calling party number custom profile.
1 Pass on calling party number if present (adding prefix if any). Use calling party number
custom profile to adjust parameter as necessary.
2 If the calling party number is received then prefix the calling party number digits using the
CGPRE parameter and use custom profile to adjust parameters as necessary. If
prefixing causes the calling party number to exceed max digits then behave as if no
calling party number has been received. If no calling party number has been received the
use CG2PRE as a default number using the 2
from the custom profile.
3 Pass on calling party number unless it is restricted. If restricted then drop the calling
party number. If a prefix is present then generate calling party number using prefix digits
and the customer calling party number profile.
If the calling party number is received then prefix the calling party number digits using the
4
CGPRE parameter and use custom profile to adjust parameters as necessary. If
prefixing causes the calling party number to exceed max digits then behave as if no
calling party number has been received. If there is no calling party number the prefix
digits will not be used.
DataKinetics DSC110 / DSC210 User Manual Issue 12
Description
nd
calling party number parameter values
Page 60