DataKinetics DSC110 User Manual page 48

DCPC Default calling party category
xxx = Default internal token to be used
when the received external CPC
mapping table is 0.
yyy = Default calling party category to
be used when send external CPC
mapping table is 0.
DEV Device number within a circuit group.
For Access Side a device is a timeslot
on a voice trunk.
For Network Side device 0
corresponds to the base CIC.
If the circuit group has been allocated a
PCM the device corresponds to a
timeslot on the PCM.
DIGS Called party number digit string to be
analysed.
Directory name on a remote data
DIRECTORY
centre.
Whether data can be discarded
DISCARD
Call Diversion mode.
DIV
Format :- x-y-zz
x = Diversion mode.
See section 7.11.15 for a description of
diversion modes.
y = Maximum number of diversion
attempts.
zz = The number of 'pull through' digits
from the B Party number for use as a
prefix to a C party number.
DOGR Default Outgoing Route Index
indicating a particular default route to a
destination.
Zero indicates no route has been
assigned.
DPC SS7 Destination point code
DPNSS Whether DPNSS is activated on the
converter.
The type of saving/loading operation to
DTYPE
be performed from a remote data
centre. See 7.11.5
Refer to DataKinetics for use of dual
DUAL
converter operation.
DUPLEX Specifies whether a connection is
duplex (Y) or simplex (N).
DataKinetics DSC110 / DSC210 User Manual Issue 12
Range for xxx 10-2 for NUP
and yyy - 0-255 circuit groups.
10-10 for other
circuit groups.
0:31
0:16 digits
0:12<text
character>
Y,N Default = N
x – 0:2 Default = 0-0-
y – 0:5 0
zz – 0:16
0,1:90 Default = 0
0:16777215
Y,N Default = N
LSC
CCTAB
SOFTWARE
CONFIG
0:2 Default = 0
Y,N Default = N
Page 48