DataKinetics DSC110 User Manual page 83

7.15.3 Circuit Assignment Circuit Group End
CACGE
Syntax
Prerequisites
Attributes
Example
7.15.4 Circuit Assignment Circuit Group Print
CACGP Circuit Assignment Circuit Group Print
This command is used to print-out the attribute of Circuit Groups(s). If no Circuit
Group(s) is specified, data for all initialised Circuit Groups will be output.
If the PAGE parameter is specified then that particular page of data will be output. If
no page is specified then page 1 will be output.
Syntax CACGP:[PAGE=,][CGRP=...];
Attributes None.
Example CACGP:CGRP=1;
CACGP:CGRP=1&2;
CACGP
CACGP:PAGE=2;
Output format
Page 1 of 3 Circuit Group Configuration
CGRP ASLINK C7RT NTTYPE
22 1
33 3
EXECUTED
Page 2 of 3 Circuit Group Configuration
CGRP DCPC ISMD TMRM L1
22 10-10 0
33 10-10 0
EXECUTED
Page 3 of 3 Circuit Group Configuration
CGRP DIV ENC U2U
22 0-0-0 N N-N-N BERLIN
33 0-0-0 N N-N-N DURHAM
DataKinetics DSC110 / DSC210 User Manual Issue 12
Circuit Assignment Circuit Group End
This command is used to end a Circuit Group.
CACGE:CGRP=;
No circuits must be assigned to the Circuit Group.
The circuit group must not be attached to a hunt sequence.
The circuit group must be blocked.
If the circuit group is circuit mapped then it can only be ended if its partner circuit
group is blocked.
A circuit group cannot be ended if it is associated with a periodic report.
CACGE:CGRP=1;
BCIC PCM
ISUP-1 230 5-1
6-2
OHEC IHEC INT COT SAT TEXT
2-0 0-0 0-1 0-0
0-0 0-0 0-0 0-0
LABEL
CPC CC POR PRI
0-0 1-1 5 NORM
0-0 1-2 6
LABEL
0-0 0-0 0-0 0-0 BERLIN
0-0 0-0 0-0 0-0 DURHAM
LABEL
BERLIN
DURHAM
Page 83