DataKinetics DSC110 User Manual page 68

7.11.12 Called Party Number Numbering Plan Mode
The possible second calling party number numbering plan modes are:-
CDNP Description
0 Pass the called party number numbering plan indication transparently if present
otherwise default to ISDN numbering plan if generated.
1 Pass the called party number numbering plan indication transparently if present
otherwise default to Unknown numbering plan if generated.
2 Pass the called party number numbering plan indication transparently if present
otherwise default to Data numbering plan if generated.
3 Pass the called party number numbering plan indication transparently if present
otherwise default to Telex numbering plan if generated.
4 Mark the called party number numbering plan indication as ISDN numbering plan.
5 Mark the called party number numbering plan indication as Unknown.
6 Mark the called party number numbering plan indication as Data numbering plan.
7 Mark the called party number numbering plan indication as Telex numbering plan.
7.11.13 Charge Mode
The possible settings for the charge indication mode are:-
CHG Description
0 Transparently carry the charge indication. If the indication is being generated inherit it
from previous charge indication sent.
1 Transparently carry the charge indication. If the indication is being generated default it to
no indication.
2 Transparently carry the charge indication. If the indication is being generated default it to
charge.
3 Transparently carry the charge indication. If the indication is being generated default it to
no charge.
4 Always provide a charge indication. If the charge indicator is not present then inherit its
value from the previous charge indicator sent.
5 Do not provide a charge indication.
6 Always generate the charge indicator with the indication set to charge.
7 Always generate the charge indicator with the indication set to no charge
DataKinetics DSC110 / DSC210 User Manual Issue 12 Page 68