15.2 Signalling Cards
The following signalling cards are suitable for use in all DSC210 and DSC110 hardware revisions:
Note: The only difference between ASC62EBM and ASC62TBM is the default settings of the E1/T1
interface selector module. The user may move this module to select either E1 or T1 operation with
either board type.
Part Number
ASC62EUM
ASC62EUI
ASC62EBM
ASC62TBM
ASC62EBI
ASC62TBI
DataKinetics DSC110 / DSC210 User Manual Issue 12
Description
CS6 E1 signalling card for SS7 operation (BNC connectors)
CS6 E1 signalling card for Q931 operation (BNC connectors)
CS6 E1/T1 signalling card for SS7 operation (RJ45 connectors)
Factory set to E1 although can be changed to T1 by the user
CS6 E1/T1 signalling card for SS7 operation (RJ45 connectors)
Factory set to T1 although can be changed to E1 by the user
CS6 E1/T1 signalling card for Q931 operation (RJ45 connectors)
Factory set to E1 although can be changed to T1 by the user
CS6 E1/T1signalling card for Q931 operation (RJ45 connectors)
Factory set to T1 although can be changed to E1 by the user
Page 201