Annex E: Safety; Ac Power Safety Warning; Lithium Battery; Connector Classification - DataKinetics DSC110 User Manual

Signalling converter
Table of Contents

Advertisement

13. ANNEX E: SAFETY

This section documents miscellaneous safety points that should be observed to
ensure the proper and safe use of the equipment worldwide.
The terminology in this section relates to various international safety standards.

13.1 AC Power Safety Warning

The Power Cord Connector is the Mains disconnect device.
For plugable equipment the socket-outlet shall be installed near the equipment
and shall be easily accessible
For your safety, the power cord provided with your chassis has a grounded plug.
Always connect the power source to a properly grounded outlet to avoid the risk of
electric shock.
The chassis is also provided with a separate Earth ground connection stud. An
Earth ground connection should be installed prior to the application of power or
peripheral connections and should never be disconnected while power or
peripheral connections are made.
Warning: You must disconnect all power cords and peripheral connections before
working on the chassis. Do not operate the system with the cover removed.

13.2 Lithium Battery

The CPU card is fitted with a Lithium Battery that contains toxic substances. This
battery is NOT rechargeable.
Caution, there is a danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturers
instructions
.

13.3 Connector Classification

13.3.1 DSC110A
Type
RJ45
BNC
15 Way D-Type
9 Way D-Type
DIN
Ports BNC or RJ45
DataKinetics DSC110 / DSC210 User Manual Issue 12
Description
Ethernet
Ethernet
Alarm Port
Serial Port 1
CPU
PCM
Status
SELV
SELV
SELV
SELV
SELV
SELV
Page 194

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc210

Table of Contents