DataKinetics DSC110 User Manual page 6

Added announcements to allow the configuration of WAV format
11 25-May-00
voice announcements using the CNANI, CNANC, CNANE and
CNANP. The playing of these announcements is managed by the
CNVRI, CNVRE, CNVRP, and STVRP commands. A new CONV
timer, T15, is also provided for the management of announcements.
Added ENC to circuit group configuration to allow encapsulation of
ISUP parameters in Q.931 messages.
Japanese TTC ISUP protocol added, including support for 16 bit
point codes.
Support for the UK Calling Line Identity Blocking Indicator for UK
ISUP. The CBI indicator can be manipulated with the CGCB
parameter.
Added support for DPNSS Call Diversion.
Support for 56k operation on access side links.
New calling party number mode (CGMD) to add CGPRE prefix to
the calling party number if one is received.
System software disks and configuration data disks must be placed
in the floppy disk drive in a five second window during start-up. This
window is indicated by the three red alarm LEDs flashing off for five
seconds.
Added new HUNT mode to indicate that no hunting will occur.
DataKinetics DSC110 / DSC210 User Manual Issue 12 Page 6