DataKinetics DSC110 User Manual page 88

7.16.5 Configuration Back Up Date Print
CNBDP Configuration Back Up Date Print
This command prints the date and time the configuration data on the disk in the
floppy disk drive was saved to disk.
Prerequisites The floppy disk must already be formatted.
Syntax CNBDP;
Attributes None.
Example CNBDP;
Output format
1995-10-23 11:07:53
EXECUTED
7.16.6 Configuration Board Initiate
CNBOI Configuration Board Initiate
This command defines a new board on the system.
Note: Boards that are used for voice only should be configured with a SIGTYPE of
NONE.
Syntax CNBOI:BPOS=,BRDTYPE=,SIGTYPE=;
Prerequisites No board has already been defined for the specified board position.
A board must physically exist for the board position and be licensed for the
signalling type.
Attributes CONFIG
Example CNBOI:BPOS=4,BRDTYPE=CS6-2-2,SIGTYPE=SS7;
CNBOI:BPOS=6,BRDTYPE=CS6-2-2,SIGTYPE=Q931;
CNBOI:BPOS=6,BRDTYPE=CS6-2-2,SIGTYPE=ISDN;
CNBOI:BPOS=8,BRDTYPE=CS6-2-2,SIGTYPE=VOICE;
CNBOI:BPOS=7,BRDTYPE=CS6-2-2,SIGTYPE=NONE;
DataKinetics DSC110 / DSC210 User Manual Issue 12 Page 88