DataKinetics DSC110 User Manual page 87

7.16.3 Configuration Announcement End
CNANE Configuration Announcement End
This command is used to end the assignment of an announcement.
Syntax CNANE:ANNC=;
Prerequisites The announcement must already have been initiated.
The announcement must not be associated with an outgoing route.
Attributes CONFIG
Example CNANE:ANNC=1;
7.16.4 Configuration Announcement Print
CNANP Configuration Announcement Print
This command is used to obtain a print-out of the attributes for announcements.
Syntax CNANP:[ANNC=];
Attributes None.
Example CNANP;
CNANP:ANNC=2;
Output format
Announcement Configuration
ANNC REPEAT LABEL
3 0 Test
4 5 Emergency
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12 Page 87