DataKinetics DSC110 User Manual page 89

7.16.7 Configuration Board End
CNBOE Configuration Board End
This command de-assigns a board from a board position.
Syntax CNBOE:BPOS=;
Prerequisites A board has been defined for the specified board position.
No signalling processor on the board has been allocated to a signalling link or a
voice resource.
No PCM on the board is configured.
The board has been blocked.
Attributes CONFIG
Example CNBOE:BPOS=4;
7.16.8 Configuration Board Print
CNBOP Configuration Board Print
This command gives a print out of all configured boards.
Syntax CNBOP;
Attributes None
Example CNBOP;
Output format
Board Configuration
BPOS BRDTYPE SIGTYPE
5 CS6-2-2 SS7
7 CS6-2-2 Q931
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12 Page 89