DataKinetics DSC110 User Manual page 123

7.20.3 Maintenance Inhibit Initiate
MNINI Maintenance Inhibit Initiate
This command initiates the inhibiting of a group of circuits, a Voice Resource or
SS7 signalling.
Circuits in a circuit group will be marked as maintenance blocked and no new
calls will be allowed.
The C7 signalling link will be deactivated and no further signalling allowed.
The Voice Resource will not play any new announcements.
There is no change to the circuit configuration data held at the lower levels.
If a group is inhibited and it is circuit mapped to a Network Side group then the
Network Side group will be made partner maintenance blocked.
Syntax MNINI:CGRP=...;
MNINI:CGRP=,DEV=;
MNINI:CGRP=,CIC=;
MNINI:C7LINK=...;
MNINI:VRS=...;
Prerequisites The circuit groups(s) or C7 links have been initiated.
Circuit groups and C7 links are not blocked.
A CIC can only be given for a network side group.
Attributes CONFIG,PROMPT
Example MNINI:CGRP=23&&32;
MNINI:CGRP=1,DEV=5;
MNINI:CGRP=2,DEV=23;
MNINI:C7LINK=5;
Output format
Inhibiting CGRP 23
Inhibiting CGRP 32
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12 Page 123