DataKinetics DSC110 User Manual page 156

7.24.6 Status PCM Print
STPCP Status PCM Print
This command requests a status report of the PCMs. The PCM status is one of the
following:-
(Note that some signalling software types currently support only Sync Loss and OK)
The Clock field is one of the following:-
Syntax STPCP;
Prerequisites None
Attributes CONFIG
Example STPCP;
Output format
PCM Status
PCM SYNCPRI PCM Status
5-1 1 PCM Loss
5-2 2 SYNC Loss
6-1 3 AIS
6-2 4 RAI
7-1 1 OK
7-2 1 OK
EXECUTED
DataKinetics DSC110 / DSC210 User Manual Issue 12
OK - Normal operational state.
PCM Loss - Loss of signal.
Sync Loss - Loss of frame alignment.
RAI - Remote alarm indication.
AIS - Alarm indication signal.
OK - The board is detecting a valid PCM signal which could potentially
be used for synchronisation.
Active - The board is detecting a valid PCM signal which is currently
providing synchronisation for the converter.
Not OK – The input to the board is not currently suitable for use as a
synchronisation source.
Fault - A fault has been detected on the board which prevents it being
used as a synchronisation source.
Clock
Fault
Not OK
Not OK
OK
Active
OK
Page 156