Dadf Error Codes; Error Code In Detail (Df) - Canon iR3570 Service Manual

Chapter 15
Code

15.7 DADF Error Codes

15.7.1 Error Code in Detail (DF)

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570N / iR2230 / / iR3530 /
15-34
Detail code Items
E592 0007 Paper trailing edge
sensor/registration
sensor error
E592 0008 Paper trailing edge
sensor/registration
sensor error
E592 0009 Paper trailing edge
sensor/registration
sensor error
E592 000A Paper trailing edge
sensor/registration
sensor error
E593 0001
Punch shift motor error
0002
Detail
Code Description
code
E400 0001
0002
DF communication
error
0003
E490 0001
Wrong DF
Description Remedial action
There is an error in the Check the paper trailing edge
voltage of light sensor. Check the horizontal
reception while light is registration sensor. Check the
shined (horizontal punch drive PCB. Replace the
registration sensor 3). finisher controller PCB.
There is an error in the Check the paper trailing edge
voltage of light sensor. Check the horizontal
reception while light is
registration sensor. Check the
not shined (horizontal punch drive PCB. Replace the
registration sensor 3). finisher control PCB.
There is an error in the Check the paper trailing edge
voltage of light sensor. Check the horizontal
reception while light is registration sensor. Check the
shined (horizontal punch drive PCB. Replace the
registration sensor 4). finisher controller PCB.
There is an error in the Check the paper trailing edge
voltage of light sensor. Check the horizontal
reception while light is registration sensor. Check the
not shined (horizontal punch drive PCB. Replace the
registration sensor 4). finisher controller PCB.
The light reception Check the horizontal registration
voltage HP sensor does motor. Check the horizontal
not go off when light is registration HP sensor. Check the
shined. punch driver PCB. Check the
finisher controller PCB. Check the
The light reception
punch shift mechanism.
voltage HP sensor does
not go on while light is
not shined.
T-15-20
Type Remedy
Disconnect and then connect the
connector. Replace the reader
Check sum error
controller PCB. Replace the ADF
controller PCB.
Disconnect and then connect the
connector. Replace the reader
Reception status error
control PCB. Replace the ADF
control PCB.
Disconnect and then connect the
connector. Replace the reader
Reception interrupt error
controlled PCB. Replace the ADF
controller PCB.
The installed DF is not of Install an ADF that is compatible
a supported type. with the machine.
0008-1517