Chapter 2
B: When a card reader is mounted on the host machine
The rear
16) Connect the power cable to the outlet.
17) Turn ON the main power switch.
18) Check if the voice board is recognized.
Service mode
Select COPIER > DISPLAY > ACC-STS > PCI 1.
If "Voice Board" is displayed, that means that the voice board is correctly recognized.
2. Setting After Installation
To use 'voice guidance' after power-on, it is necessary to set the followings.
1) Select [Additional Function] > [System Settings] > [Voice Navigation Guide] > [Use Voice Navigation].
2) Select ON key (Default: OFF)
3) Press OK key.
3. Operation Check
<When Using the Voice Guidance>
1) Press the reset key for 3 sec or longer.
2) When the display of the number of copy is enclosed with red lines on the screen, "Voice Guidance" becomes enabled.
<When Stopping the Usage>
1) Press the reset key for 3 sec or longer.
2-62
[2]
[1]
F-2-204
[2]
[1]
[1]
F-2-205
[3]
[3]