Checking The Contents; Installation Procedure - Canon iR3570 Service Manual

Chapter 2
The card reader must be used in combination with the Card Reader Mounting Kit-B1.

2.6.2 Checking the Contents

iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / iR3530 /
<Card Reader-C1>
<Card Reader Mounting Kit-B1>

2.6.3 Installation Procedure

iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / iR3530 /
When you have installed the Card Reader-C1, make the following selections, COPIER> FUNCTION> INSTALL> CARD, and enter the card number you will be
using; otherwise, the card will not be recognized upon insertion.
Be sure to go through the following steps on the host machine before starting the work:
1. Hold down the control panel power switch for 3 sec or more.
2. Go through the shutdown sequence as instructed on the screen so that you may turn off the main power switch.
3. Turn off the main power switch.
4. Disconnect the power cable (from the wall outlet).
2-18
[1] Card Reader-C1
[2] RS tightening screw (M4x10)
[3] Toothed washer
[1]
[1] Card reader base
[2] Relay harness
[3] TP screw (M4x25)
[4] TP screw (M4x8)
[5] Toothed washer
T-2-6
1 pc.
1 pc.
1 pc.
[2] [3]
F-2-78
T-2-7
1 pc.
1 pc.
1 pc.
1 pc.
2 pc.
F-2-79
0007-2707
0007-2709